After the scientific and rigorous work of our technical personnel, a thin film anti rust oil has been successfully developed. After salt spray test, wet heat test, and laminated test, all test results have been qualified. The thin film anti rust oil is mainly used for rust prevention after nitriding and blackening of hardware, rust prevention for bearing sealing, and spray rust prevention for steel plate rolling. We solemnly recommend it to our customers. The product introduction is as follows:

         Sencro thin film anti rust oil is made by adding various efficient additives to a low viscosity base oil through scientific and technological compatibility; After spraying or dipping, a protective film can be formed on the surface of the workpiece to selectively adsorb at the interface between oil and metal, resisting the invasion of corrosive media such as oxygen and moisture into the metal surface, thereby reducing the probability and rate of corrosion of metal components and achieving long-term rust prevention; It has the advantages of low viscosity, high flash point, long rust prevention time, and is not affected by seasons when used.

     The indicators of thin film anti rust oil are as follows:

      Attention: 

       1.Avoid mixing with oils containing different types of additives. 

       2. Before oil immersion rust prevention, metal products need to be cleaned thoroughly and ensured to be fully dry and free of moisture. 

       3. It should be sealed and placed indoors in a well ventilated and dry place, avoiding direct sunlight, high temperature baking, flames, and strong oxidants. 

       4. After opening the barrel for use, the lid should be promptly sealed to maintain a tight seal. 

       5. Different metal parts and parts with different surface treatments should not be stored in contact with each other to avoid contact corrosion.

     Over the years, Sencro has continuously expanded its product line based on its own advantages, from the earliest quenching media to emulsified oils, cutting fluids, cleaning agents, and now to thin film rust prevention oils. Sencro insists on producing high-quality products and focuses on delivering results to customers.